The Top Part of the DSLR Baseplate is a great add on for those with more than one DSLR.
|
The Scorpion Shoulder Assembly is an all-in-one shoulder pad system for an in-line Zacuto DSLR Baseplate kit. It is best used for traditional ENG style shooting with our EVF or a small monitor.
|
The Zacuto Scorpion rig is the ultimate solution to DSLR shoulder mounted shooting with an Zacuto EVF.
|
DSLR Pro Shoulder Support with 1/4-20 thread for Powerbase
|
The Philip Bloom Signature Series Pocket Dolly™ is a hybrid slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the adjustable arc diameter handle…
|
The Slingshot is an ultralightweight DSLR stabilization rig. The rig utlizes our Gorilla Plate, EVF Gorilla Plate Bracket, and a fully articulating handle with glove for maximum comfort.
|
This cable has two regular HDMI heavy duty swivable cable heads. It can be set at right angles in all directions to avoid strain on the cable.
|
The fixed right angle position not only gives you more space between the EVF and camera but it gives you a sturdier connection and prevents your cable from becoming loose, ensuring you have the best…
|
The Zwiss Cage Plate is an 11" long cheese plate that includes multiple 1/4 20" and 3/8 16" mounting holes as well as (4) 15mm mounting holes on the ends for a variety of uses. It differs from our…
|
Portable mounting solution for your DSLR and accessories. Utilizing our Zwiss Cage Plate, the Zwiss Cage allows you to easily mount articulating arms, rods, monitors, lights, sound devices, and more.
|
Kessler Crane, understands what it means to shoot on a tight budget without compromising your creative endeavor.
|
V3 Mounting plate, 360 rotation, maximum stability and minimum wobble, constructed of high grade 6061-T6 aluminum, manual and automatic camera tilt control.
|
KC-12/8 crane, V3 Mounting plate / base section, capatible with 16' Upgrade. 360 rotation,invertible camera platform, internal sleeve bearings, high grade 6061-T6 aluminum, precision made and held…
|
The Kessler KC-Lite 8.0 has been designed to be the best »economy« crane on the market.
|
The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsable for easy transport, but you can also mount the Kessler Pocket Dolly™ to it, turning it into a…
|
The Kessler Pocket Jib™ is the ultimate compact, portable jib. Not only is this jib fully collapsable for easy transport, but you can also mount the Kessler Pocket Dolly™ to it, turning it into a…
|
Revolutionary tripod system designed to support camera cranes/jibs. The K-Pod™ was designed to be the best tripod system for your camera crane / jib, but it is also an excellent tripod to shoot from,…
|
100% stainless steel spiked feet for the K-Pod System™. Set of 3.
|
Standard 6" dual-locking caster wheels for the K-Pod System™. Set of 3.
|
6" dual-locking nomadic "All- Terrain" wheels for the K-Pod System™. These wheels are for use on rough terrain, like gravel or in a yard.
|
|
|
If you already have our standard Track Dolly Trucks and would to upgrade to our premium wheels, you can order the premium wheel upgrade (12 wheels).
|
|
|
Our new 7" Idler Arm Upgrade for our K-Pod™ Track Dolly Trucks allow for improved operation when using the trucks on track that is not perfectly straight or parallel.
|
The Push/Pull Handle securely mounts to the leg of the K-Pod to allow you to push or pull a camera operator, when using the K-Pod as a dolly.
|
First, it is an adjustable custom made seat using the K-Pod™ as a dolly on our K-Flex Track. Secondly, give you a second, adjustable postion to mount a tripod head.
|
Keep those troublesome cables out of the way with the Kessler Wheel Skirts. The Wheel Skits are compatible with the Kessler Standard Caster Wheels only.
|
|
|
|
|
The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
|
The Kessler CineSlider™ is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
|
Kessler CineSlider 100mm Ball Mount
|
Kessler 100mm High Hat (includes knob for fluid heads with 3/8" threaded stud). NOTE: Optional M10 Knob. For fluid heads with metric M10 threaded stem/stud like Sachtler, Cartoni, etc.
|
The Kessler K-Flex Dolly Track is an extremely portable, seamless, flexible dolly track.
|
The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan & tilt head.
|
The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan & tilt head.
|
Want to get smooth, consistent, short-run dolly shots, without having to carry around a dolly system and track? The Pocket Dolly™ is the solution for those shots!
|
The Philip Bloom Signature Series Pocket Dolly™ is a hybrid slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the adjustable arc diameter handle…
|
|
Kessler Pocket Dolly™ V2 Brake is used to lock carriage in place.
|
A sturdy adjustable foot system for the Philip Bloom Pocket Dolly, CineSlider™ & Pocket Dolly™ sliders. Sold as a set of two.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
|
|
|
Turn your 4 foot Shuttle Pod Rail Starter Kit into a 8 foot length, or add multiple extensions to extend the rail length longer.
|
Use the Shuttle Pod Cross Brace when you need to add additional supports under your Shuttle Pod rail.
|
The Keeper / Grabber Wheel Kit is used to hold your Shuttle Pod to the rails, when using in an inclined or inverted configuration.
|
The Shuttle Pod Outrigger Foot Kit is an adjustable foot support system that can be attached to the Shuttle Pod rail for our Kessler Crane when using as the rail system for your Shuttle Pod.
|
Shuttle Pod Pedestal Feet are used to sit the Shuttle Pod on the ground when converting the Shuttle Pod to the winch system, or using as a low mount shooting platform.
|
The 100 Series motor is the suggested normal use motor for the Pocket Dolly or very fast motor for the CineSlider. This motor has less torque than the 200 or 500 Series motors.
|
The 200 Series motor is the suggested Time Lapse (slow) motor for the Pocket Dolly, and the suggested normal use motor for the CineSlider.
|
The 500 Series motor is the suggested Time Lapse (slow) motor for the CineSlider and would be the very slow Time Lapse motor for the Pocket Dolly and has the most torque of the 3 main motors.
|
The 1000:1 motor would be used when ultra slow movements are desired. This motor would move at approximately half the speed of the 500 Series Motor.
|
The 50:1 motor would be used when extremely fast movements are desired.This motor would move at approximately twice the speed of the 100 Series motor.
|
The elektraDRIVE Mount for the CineSlider allows you to mount one of the elektraDRIVE Motor Pods to the CineSlider.
|
The elektraDRIVE Mount for the Pocket Dolly allows you to mount one of the elektraDRIVE Motor Pods to the Pocket Dolly.
|
|
The ElektraDRIVE BASIC Controller is for use with the ElektraDRIVE motor configurations for the Pocket Dolly or CineSlider, when the advanced features of our ORACLE Controller are not needed.
|
The ORACLE Controller is the best motorized head solution on the market, for under 1500 €.
|
The Kessler Shuttle Pod™ is a unique camera dolly system that can utilize your existing standard Kessler Crane (11.5" width) as the rail / track system for the dolly.
|
|
|
|
Pushing the weight limits of the crane the Ultra Duty Control Rod is for you. Made especially for heavy weight load conditions.
|
|
|
Make your transportation easier with the newly redesigned Kessler Crane® Soft Case! This case is custom made for the Kessler Crane®. The new model has a rigid Masonite padded floor.
|
This case is custom made for the Kessler K-Pod™. The case has a rigid Masonite padded floor and the foam lined top and sides keep their soft shape and ensure the protection of your equipment.
|
The K-Flex Case is the perfect way to transport your K-Flex Track to your shoots. The case has a rigid CORDURA® fabric wrapped shell, two side grab handles makes it easy to move one 50' roll of…
|
|
|
Easily transport your KC-Lite camera crane with our new KC-Lite Soft Case for the KC-Lite 8.0 Camera Crane. Case will hold KC-Lite 8.0 crane, as well as KC-5.5 Short Tip upgrade.
|
|
|
|
This is a custom case for the Pocket Jib. It is very handy for transportation purposes.
|
Hardshell case with custom waterjet cut foam insert will hold Revolution Pan/Tilt Head, ORACLE Controller, 3 elektraDRIVE motor pods, 2 elektraDRIVE mounts, battery pack, cables and small…
|
|
|
|
Tool-less Package Not a glorified wing nut! Upgrade your crane and add time and convenience to your shoot. Eliminate the need for tools by using these hand knobs making setup and tear down more…
|
The Kessler 18 ft Upgrade Kit will upgrade your 12 ft Kessler Crane to an 18 ft crane, giving a total reach of 13.5 feet.
|
For the ultimate shot enthusiast, Kessler Crane® provides a 12 foot upgrade. Combine this extension kit with your 5 1/2 foot crane and the long tip or your 8 foot crane to convert your Kessler Crane®…
|
|
This extension tip provides the piece needed to complete the conversion of the 5 1/2 foot Kessler Crane® to the 8 foot model.
|
If you have purchased our 8’ or 12’ crane model, using this tip will give you the 5.5 ft option. The short tip will give you a 3’ drop and equal lift for a total of six feet of camera travel.
|
When the Kessler Crane® is not in motion protect it from unwanted vertical movement with this braking system.
|
|
Use the Ball Relocator to attach your 100mm ball to the end of your rig. The Relocator mounts to the camera basket using four wing bolts to allow leveling independent from the crane.
|
This package will still allow you to use the factory weight bar for fine tuning as well as provide extra surface area for other accessories such as zoom control or a monitor. Extremely useful for…
|
|
|
Add this cable support upgrade kit to your KC-8 crane for greater support and stability.
|
|
|
|
No longer struggle to see your LCD display or reach your zoom/focus controls while operating your crane. With the Kessler Rear Control Center, you can easily mount your display‡, as well as…
|
|
|
|
|
|
|
Convert your KC-Lite 8.0 from 8 foot length to 5.5 length with the KC-Lite 5.5 Short Tip Upgrade.
|
The EVF Cheese Stick is an accessory for the Zacuto EVF. It attaches to the EVF via two of the four accessory screw holes on the back of the unit.
|
The Pincher is a universal HDMI cable restraint for DSLR's. It is the perfect solution for keeping your HDMI cable in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fully Featured 9" Rack Mountable Camera-Top LCD Field Monitor with HD-SDI / HDMI Cross Conversion & Anaglyph 3D
|